You can pair the MAC-BT950 with your phone just using the Headset, however in this tutorial it will explain on how to pair your MAC-BT950 with your phone while Headset is attached to the Docking Station.

  IMPORTANT INFORMATION
  1. Plug in the Power Connector to the Docking Station.
  2. Check if the Headsets correctly plugged in the Docking Station Data/Charging Port.

** Ensure the MAC-BT950's Power is OFF **
  By using docking stations SEND/MFB button Turn OFF the power of headset.

  * When the Headset is Powered OFF, the Docking Station display screen should be blank,      like Figure 3.

1. Set the MAC-BT950 to Pairing Mode. (while the Docking Station and Headset is     Powered OFF)

2. Set the Phone to Pairing Mode. (Phone menu may be different, please refer to your     phone's manual for help)

1. Press the Phones Menu
2. Highlight the Settings & Tools then OK Button
3. Highlight the Bluetooth Menu then OK Button
4. Highlight Search For New Device (or Add New Device) and press the Select OK Button or the Menu Confirm Key. (If Bluetooth power is set to off, you will be prompted to turn power ON. Select Yes and press the OK Button.)
5. From the Device list, highlight MAC-BT950 and press the OK Button or the Menu Confirm Key.
6. Enter the PIN "0000" and press the OK Button or the Menu Confirm Key.

  3. The MAC-BT950 Docking Station display will show "Connect OK" with melody, when       both devices are successfully paired. Your phone should now be paired with the
      MAC-BT950.